Structural | Guararapes

With wood patches and any one knot limited to a maximum diameter of 6mm, both sides repaired and mill oiled, this edge seales product is perfect for concrete forming, providing superior performance and very limited deflections in the most demanding applications.

Technical Specifications

Defects
Wood patches
Sound knots
Unsound knots
Splits

Face
Up to 20 of 40 mm
Up to 6mm
Up to 6mm, repaired
Up to 3 of 5mm, repaired

Back
Up to 20 of 40 mm
Up to 6mm
Up to 6mm, repaired
Up to 3 of 5mm, repaired

A structural panel with a majority solid wood face. All repairs wider than 3mm are made using all wood patches. This panel is a perfect option for several uses where strength and a solid substrate for painting or veneering is required.

Technical Specifications

Defects
Wood patches
Sound knots
Unsound knots
Splits

Face
Up to 15 of 40mm
Not permitted
Not permitted
Up to 3 of 2mm repaired

Back
Not usually
Up to 40mm
Up to 40mm
Up to 3 of 15mm

With knots wood patches and small repaired knots limited to a maximum diameter of 6mm on the face, this panel provides an excellent surface to be painted for all structural, industrial or paneling applications.

Technical Specifications

Defects
Wood patches
Sound knots
Unsound knots
Splits

Face
Up to 20of 40mm
Up to 6mm
Up to 6mm, repaired
Up to 3 of 5mm repaired

Back
Not usually
Up to 40mm
Up to 40mm
Up to 3 of 15mm

Combined subfloor and underlayment panel, designed specifically for single-layer floor construction, with a solid surface to be used beneath carpet and pad or when other finish floor products are used. Also excellent for industrial applications.

Technical Specifications

Defects
Wood patches
Sound knots
Unsound knots
Splits

Face
Not usualy
Up to 40mm
Up to 40mm, repaired
Up to 3 of 10mm repaired

Back
Not usually
Up to 40mm
Up to 40mm
Up to 3 of 15mm

Developed specially for floor decking and industrial applications where thickness accuracy is critical, these panels may also be used as concrete shuttering panels, roof decking, and wall sheathing. A very versatile product at a very competitive price.

Technical Specifications

Defects
Sound knots
Unsound knots
Splits

Face
Up to 60mm
Up to 40mm, repaired
Up to 3 of 15mm, repaired

Back
Up to 75mm
Up to 75mm
Up to 3 of 15mm

Upon request GUARAPLY panels of 12mm, 15mm, 18mm and 21mm and, of all available grades may be delivered with T&G (tongue and grooved), machined profiles on the long edges. T&G panels are specially recommended for floor and roof decking applications to obtain an increased point load resistance on panel joints. They may also be a good option for wall paneling, offering very well matched joints. T&G profiling is a sizing operation so panels have a net face width of 1.205mm +0/-3mm. A specially designed gap is left on the back of the T&G joints so that panels can expand sligthly when in contact with water, avoiding buckling problems.

Delivering a very high structural performance, these panels are not repaired and may have composed faces and backs. They offer a perfect solution for applications such as roof sheathing, sidewalls, subflooring, crating, packing, pallet components, etc.

Technical Specifications

Defects
Sound knots
Unsound knots
Splits

Face
Up to 60mm
Up to 40mm
Up to 3 of 25mm, repaired

Back
Up to 75mm
Up to 75mm
Up to 3 of 25mm

Created to offer the highest structural performance, these panels are not repaired and often have composed faces, backsand high grade inner plies made of the higher density veneers avalilable to provide the best solution for upholstered furniture frame compenents.

Technical Specifications

Defects
Sound knots
Unsound knots
Splits

Face
Up to 60mm
Up to 40mm
Up to 3 of 25mm, repaired

Back
Up to 75mm
Up to 75mm
Up to 3 of 25mm